25 INCH LAPMASTER MODEL LSP-9 4-WAY PLANETARY, DUAL FACE LAPPING MACHINE

Description

LAPMASTER MODEL LSP-9  4-WAY PLANETARY, DUAL FACE LAPPING MACHINE
SPECS AND INFO FROM WEBSITE MUST BE CONFIRMED PLEASE ASK FOR JIM
FOR MORE INFO 7146121480 TNT INDUSTRIAL ORANGE CALIF.,
The Lapmaster model LSP-9 is a 4-way, planetary, dual face lapping machine with a sophisticated control system. It can execute complex lapping and polishing routines while producing precise and repeatable results. The LSP machines can lap or polish a wide range of materials to very tight specifications.
Operation is governed by a programmable controller .Custom software prompts the operator for specific operating parameters and stores up to 10 routines for recall as needed. Password protection is available to restrict access to programming or program selection.
Through a load cell, the controller continually monitors and adjusts the top plate weight to maintain constant pressure on the parts. The LSP-9’s unique combination of pneumatic pressure controls, frame design, and load control algorithms produce the most accurate and repeatable thickness results in the industry.
The five carriers are gear driven for smooth action when lapping fragile parts.
Plates and carrier speeds are varied through AC frequency inverters. The machine is built on a box beam frame and the top plate is supported from a four stantion bridge for stability and durability. The ring gear drops down below the plate to make loading and unloading easier.
Vertical lifting, clear plastic guards protect the operator without getting in the way.
They also keep the slurry confined to the machine, keeping the shop clean. Slurry is fed through a variable speed pump. A propeller agitator guarantees that abrasive stays suspended.
A part thickness sizing device to automatically shut off the machine, and a water rinse at the end of each run to assist in cleaning are optional. Custom lapping and polishing plates are available upon request, as are special electrical services.
Each machine comes complete with a set of four conditioning gears, a flatness gauge, and a starter kit of abrasive, vehicle and carriers.
Specifications
Model Type
LSP-9
Plate Diameter
25
inches
Plate Diameter
635
mm
Length
40
inches
Length
1016
mm
Width
66
inches
Width
1676
mm
Height
96
inches
Height
2438
mm
Est. Shipping Weight
5,350
lbs
Est. Shipping Weight
2428
kg
No. of Carriers
5
Carrier Root Diameter
8.8
inches
Carrier Root Diameter
224
mm
Maximum Part Circle
8.5
inches
Maximum Part Circle
216
mm
Maximum Part Down Pressure
700
lbs
Maximum Part Down Pressure
317.5
kg
Top Plate Drive
5.4
HP
Top Plate Drive
4.0
kW
Bottom Plate Drive
5.4
HP
Bottom Plate Drive
4.0
kW
Sun Gear Drive
1.5
HP
Sun Gear Drive
1.1
kW
Compressed Air
80
PSI
Compressed Air
3
CFM